The doctrine of separation of powers implies that each pillar of democracy – the executive, legislature and the judiciary – perform separate functions and act as separate entities. The executive is vested with the power to make policy decisions and implement laws. The legislature is empowered to issue enactments. The judiciary is responsible for adjudicating disputes. The doctrine is a part of the basic structure of the Indian Constitution[1] even though it is not specifically mentioned in its text. Thus, no law may be passed and no amendment may be made to the Constitution deviating from the doctrine. Different agencies impose checks and balances upon each other but may not transgress upon each other’s functions. Thus, the judiciary exercises judicial review over executive and legislative action, and the legislature reviews the functioning of the executive. There have been some cases where the courts have issued laws and policy related orders through their judgements. These include the Vishakha case where guidelines on sexual harassment were issued by the Supreme Court, the order of the Court directing the Centre to distribute food grains (2010) and the appointment of the Special Investigation Team to replace the High Level Committee established by the Centre for investigating black money deposits in Swiss Banks. In 1983 when Justice Bhagwati introduced public interest litigation in India, Justice Pathak in the same judgement warned against the “temptation of crossing into territory which properly pertains to the Legislature or to the Executive Government”[2]. Justice Katju in 2007 noted that, “Courts cannot create rights where none exist nor can they go on making orders which are incapable of enforcement or violative of other laws or settled legal principles. With a view to see that judicial activism does not become judicial adventurism the courts must act with caution and proper restraint. It needs to be remembered that courts cannot run the government. The judiciary should act only as an alarm bell; it should ensure that the executive has become alive to perform its duties.” [3] While there has been some discussion on the issue of activism by the judiciary, it must be noted that there are also instances of the legislature using its law making powers to reverse the outcome of some judgements. (M.J. Antony has referred to a few in his article in the Business Standard here.) We discuss below some recent instances of the legislature overturning judicial pronouncements by passing laws with retrospective effect. On September 7, 2011 the Parliament passed the Customs Amendment and Validation Bill, 2011 which retrospectively validates all duties imposed and actions taken by certain customs officials who were not authorized under the Customs Act to do the stated acts. Some of the duties imposed were in fact challenged before the Supreme Court in Commissioner of Customs vs. Sayed Ali in 2011[4]. The Supreme Court struck down the levy of duties since these were imposed by unauthorised officials. By passing the Customs Bill, 2011 the Parliament circumvented the judgement and amended the Act to authorize certain officials to levy duties retrospectively, even those that had been held to be illegal by the SC. Another instance of the legislature overriding the decision of the Supreme Court was seen in the Essential Commodities (Amendment) Ordinance, 2009 which was passed into an Act. The Supreme Court had ruled that the price at which the Centre shall buy sugar from the mill shall include the statutory minimum price (SMP) and an additional amount of profits that the mills share with farmers.[5] The Amendment allowed the Centre to pay a fair and remunerative price (FRP) instead of the SMP. It also did away with the requirement to pay the additional amount. The amendment applied to all transactions for purchase of sugar by the Centre since 1974. In effect, the amendment overruled the Court decision. The executive tried to sidestep the Apex Court decision through the Enemy Property (Amendment and Validation) Ordinance, 2010. The Court had issued a writ to the Custodian of Enemy Property to return possession of certain properties to the legal heir of the owner. Subsequently the Executive issued an Ordinance under which all properties that were divested from the Custodian in favour of legal heirs by a Court order were reverted to him. The Ordinance lapsed and a Bill was introduced in the Parliament. The Bill is currently being examined by the Parliamentary Standing Committee on Home Affairs. These examples highlight some instances where the legislature has acted to reverse judicial pronouncements. The judiciary has also acted in several instances in the grey areas separating its role from that of the executive and the legislature. The doctrine of separation of powers is not codified in the Indian constitution. Indeed, it may be difficult to draw a strict line demarcating the separation. However, it may be necessary for each pillar of the State to evolve a healthy convention that respects the domain of the others.
[1] Keshavananda Bharti vs. State of Kerala AIR 1973 SC 1461
[2] Bandhua Mukti Morcha AIR 1984 SC 802
[3] Aravali Golf Club vs. Chander Hass (2008) 1 SCC (L&S) 289
[4] Supreme Court in Commissioner of Customs vs. Sayed Ali (2011) 3 SCC 537
[5] Mahalakshmi Mills vs. Union of India (2009) 16 SCC 569
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
