Earlier this week, Lok Sabha passed the Bill that provides for the allocation of coal mines that were cancelled by the Supreme Court last year.  In light of this development, this post looks at the issues surrounding coal block allocations and what the 2015 Bill seeks to achieve.

In September 2014, the Supreme Court cancelled the allocations of 204 coal blocks.  Following the Supreme Court judgement, in October 2014, the government promulgated the Coal Mines (Special Provisions) Ordinance, 2014 for the allocation of the cancelled coal mines.  The Ordinance, which was replaced by the Coal Mines (Special Provisions) Bill, 2014, could not be passed by Parliament in the last winter session, and lapsed. The government then promulgated the Coal Mines (Special Provisions) Second Ordinance, 2014 on December 26, 2014.  The Coal Mines (Special Provisions) Bill, 2015 replaces the second Ordinance and was passed by Lok Sabha on March 4, 2015. Why is coal considered relevant? Coal mining in India has primarily been driven by the need for energy domestically.  About 55% of the current commercial energy use is met by coal.  The power sector is the major consumer of coal, using about 80% of domestically produced coal. As of April 1, 2014, India is estimated to have a cumulative total of 301.56 billion tonnes of coal reserves up to a depth of 1200 meters.  Coal deposits are mainly located in Jharkhand, Odisha, Chhattisgarh, West Bengal, Madhya Pradesh, Andhra Pradesh and Maharashtra. How is coal regulated? The Ministry of Coal has the overall responsibility of managing coal reserves in the country.  Coal India Limited, established in 1975, is a public sector undertaking, which looks at the production and marketing of coal in India.  Currently, the sector is regulated by the ministry’s Coal Controller’s Organization. The Coal Mines (Nationalisation) Act, 1973 (CMN Act) is the primary legislation determining the eligibility for coal mining in India.  The CMN Act allows private Indian companies to mine coal only for captive use.  Captive mining is the coal mined for a specific end-use by the mine owner, but not for open sale in the market.  End-uses currently allowed under the CMN Act include iron and steel production, generation of power, cement production and coal washing.  The central government may notify additional end-uses. How were coal blocks allocated so far? Till 1993, there were no specific criteria for the allocation of captive coal blocks.  Captive mining for coal was allowed in 1993 by amendments to the CMN Act.  In 1993, a Screening Committee was set up by the Ministry of Coal to provide recommendations on allocations for captive coal mines.  All allocations to private companies were made through the Screening Committee.  For government companies, allocations for captive mining were made directly by the ministry.  Certain coal blocks were allocated by the Ministry of Power for Ultra Mega Power Projects (UMPP) through tariff based competitive bidding (bidding for coal based on the tariff at which power is sold).  Between 1993 and 2011, 218 coal blocks were allocated to both public and private companies under the CMN Act. What did the 2014 Supreme Court judgement do? In August 2012, the Comptroller and Auditor General of India released a report on the coal block allocations. CAG recommended that the allocation process should be made more transparent and objective, and done through competitive bidding. Following this report, in September 2012, a Public Interest Litigation matter was filed in the Supreme Court against the coal block allocations.  The petition sought to cancel the allotment of the coal blocks in public interest on grounds that it was arbitrary, illegal and unconstitutional. In September 2014, the Supreme Court declared all allocations of coal blocks, made through the Screening Committee and through Government Dispensation route since 1993, as illegal.  It cancelled the allocation of 204 out of 218 coal blocks.  The allocations were deemed illegal on the grounds that: (i) the allocation procedure followed by the Screening Committee was arbitrary, and (ii) no objective criterion was used to determine the selection of companies.  Further, the allocation procedure was held to be impermissible under the CMN Act. Among the 218 coal blocks, 40 were under production and six were ready to start production.  Of the 40 blocks under production, 37 were cancelled and of the six ready to produce blocks, five were cancelled.  However, the allocation to Ultra Mega Power Projects, which was done via competitive bidding for lowest tariffs, was not declared illegal. What does the 2015 Bill seek to do? Following the cancellation of the coal blocks, concerns were raised about further shortage in the supply of coal, resulting in more power supply disruptions.  The 2015 Bill primarily seeks to allocate the coal mines that were declared illegal by the Supreme Court.  It provides details for the auction process, compensation for the prior allottees, the process for transfer of mines and details of authorities that would conduct the auction.  In December 2014, the ministry notified the Coal Mines (Special Provisions) Rules, 2014.  The Rules provide further guidelines in relation to the eligibility and compensation for prior allottees. How is the allocation of coal blocks to be carried out through the 2015 Bill? The Bill creates three categories of mines, Schedule I, II and III.  Schedule I consists of all the 204 mines that were cancelled by the Supreme Court.  Of these mines, Schedule II consists of all the 42 mines that are under production and Schedule III consists of 32 mines that have a specified end-use such as power, iron and steel, cement and coal washing. Schedule I mines can be allocated by way of either public auction or allocation.  For the public auction route any government, private or joint venture company can bid for the coal blocks.  They can use the coal mined from these blocks for their own consumption, sale or for any other purpose as specified in their mining lease.  The government may also choose to allot Schedule I mines to any government company or any company that was awarded a power plant project through competitive bidding.  In such a case, a government company can use the coal mined for own consumption or sale.  However, the Bill does not provide clarity on the purpose for which private companies can use the coal. Schedule II and III mines are to be allocated by way of public auction, and the auctions have to be completed by March 31, 2015.  Any government company, private company or a joint venture with a specified end-use is eligible to bid for these mines. In addition, the Bill also provides details on authorities that would conduct the auction and allotment and the compensation for prior allottees.  Prior allottees are not eligible to participate in the auction process if: (i) they have not paid the additional levy imposed by the Supreme Court; or (ii) if they are convicted of an offence related to coal block allocation and sentenced to imprisonment of more than three years. What are some of the issues to consider in the 2015 Bill? One of the major policy shifts the 2015 Bill seeks to achieve is to enable private companies to mine coal in the future, in order to improve the supply of coal in the market.  Currently, the coal sector is regulated by the Coal Controller’s Organization, which is under the Ministry of Coal.  The Bill does not establish an independent regulator to ensure a level playing field for both private and government companies bidding for auction of mines to conduct coal mining operations.   In the past, when other sectors have opened up to the private sector, an independent regulatory body has been established beforehand.  For example, the Telecom Regulatory Authority of India, an independent regulatory body, was established when the telecom sector was opened up for private service providers.  The Bill also does not specify any guidelines on the monitoring of mining activities by the new allottees. While the Bill provides broad details of the process of auction and allotment, the actual results with regards to money coming in to the states, will depend more on specific details, such as the tender documents and floor price.  It is also to be seen whether the new allotment process ensures equitable distribution of coal blocks among the companies and creates a fair, level-playing field for them.  In the past, the functioning of coal mines has been delayed due to delays in land acquisition and environmental clearances.  This Bill does not address these issues.  The auctioning of coal blocks resulting in improving the supply of coal, and in turn addressing the problem of power shortage in the country, will also depend on the efficient functioning of the mines,  in addition to factors such as transparent allocations.

On October 18, it was reportein the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019.  The President had given assent to this Act in December 2019 and the Act came into force in January 2020.   Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published.  This raises the question how long the government can take to frame Rules and what is the procedure guiding this.  In this blog, we discuss the same.

Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them.  Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law.  For example, the Citizenship Amendment Act provides who will be eligible for citizenship.  The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules.  Delay in framing Rules results in delay in implementing the law, since the necessary details are not available.  For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers.  These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.

Timelines and checks and balances for adherence

Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation.  Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation.  These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.

Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force.   Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation.  The reason for the extension needs to be stated.   Such extensions may be granted for a maximum period of three months at a time.  For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.

Activity

Timeline

  • Publication of Rules, Regulations, and Bye-Laws, where public consultation is required under the Act
  • A minimum of 30 days for public feedback
  • Consequently, for publication,
  • Three months, if the number of suggestions is small
  • Six months, if the number of suggestions is large
  • Publication of Rules, Regulations, and Bye-Laws, not requiring public consultation
  • Six months from the date on which the concerned Act came into force
  • Any extension for publication
  • A maximum of three months at a time

To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice.  These reports are not available in the public domain.

Recommendations to address delays

Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries.  To address this, they have made the following key recommendations:

  • Statement on reasons for the delay: In 2011, Rajya Sabha Committee recommended that while laying Rules/Regulations before Parliament, the Ministry should also lay a statement explaining the reasons for the delay, if any.
  • Scrutiny of delays by the Cabinet Secretary:  In 2016, the Rajya Sabha Committee recommended that the Cabinet Secretary should continue the practice of calling the Secretaries of concerned Ministries/Departments, to explain the reasons for the delay in framing the subordinate legislation.  Each Ministry should send a quarterly status report to the Cabinet Secretariat.
  • Revisiting guidelines: In 2011, Lok Sabha Committee recommended that the 1986 guidelines should be revisited and all major recommendations of the Committee should be incorporated.  However, as per the Action Taken Report, the government observed that the ministries consider the extant guidelines adequate and these guidelines were re-iterated in 2012.

Are all Rules under an Act required to be framed?

Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”.  Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making.  However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules.  This makes the implementation of the Act consequent to the publication of respective Rules.  For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons.  It provides that the manner of collection of such information may be specified by the central government.  Unless the manner is prescribed, such collection cannot take place.

That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry.  In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001.  It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary.   The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances.  The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.

Some key issues related to subordinate legislation

The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation.  Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.

  • Capacity of Committees on Subordinate Legislation:  Parliamentary Committees on Subordinate Legislation have the responsibility to examine Rules in detail.  In past, they have examined some key rules, regulations, and notifications regarding e-commerceliability of internet-based services, and demonetisation.  However, usually, they are able to examine only a fraction of subordinate legislation in detail.  For more details, please see the PRS discussion paper here.
  • Uniformity of standards:  Countries such as UKUSAAustralia, and Canada have overarching legislation for regulating the framing of subordinate legislation.  These laws provide for the manner of public consultation, timelines, drafting standards, and a common register.  India does not have any similar law.  In India, the detail whether public consultation for subordinate legislation is required or not, is specified in respective Acts.  The General Clauses Act, 1897 also governs certain aspects of the framing of subordinate legislation.  In addition, the Pre-Legislative Consultation Policy, 2014 guides the pre-legislative consultation on subordinate legislation.

See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022.  Also, check out PRS analysis of: